DPMT 21.505

Insert Specifics:
Insert IC: 1/4"
Insert Width: 3/32"
Corner Radius: .008
Through Hole: .110"
ISO Designation: DPMT 07 02 02

DPMT 55 degree Diamond with with Chipbreaker.  Screw-On style insert.  Single sided insert with molded chip breaker.  For semi-finishing and finishing cuts - 11 degree relief angle.  Feed range .003 to .012 IPR / 0.1-0.3 MM/rev

Carbide Grades: (Choose above)
C2: Uncoated grade used primarily in mild cutting conditions.  Used for turning and milling steel, cast iron and other non-ferrous metals.
C5: For roughing to semi-finishing of Steel.
C2 Coated: Multi Layer CVD (TiC/Al203/TiN) Aluminum Oxide Coated.  Ideal for machining 200 and 300 series stainless steel, cast irons, non-ferrous alloys and most high temperature alloys.  Excellent wear resistance.
C5 Coated: Multi Layer CVD (TiN/TiC/TiCN/TiN) coating.  Best for general purpose milling and turning carbon and alloy steels and tool steels.

Not all carbide grades are available with all inserts.