TPGC 222 Carbide Insert

Insert Specifics:
Insert IC: 1/4"
Insert Width: 3/32"
Corner Radius: 1/32
Through Hole: .118"
ISO Designation: TPGC 11 03 08

TPGC-LF Triangle Positive Fully Ground Insert with Countersunk Hole.  Screw-On Insert.  11 degree relief angle. Single Sided Insert with Chipbreaker suitable for materials that create a short chip.  Feed range .003 to .012 IPR / 0.075-0.3 mm/rev.

Carbide Grades: (Choose above)
C2: Uncoated grade used primarily in mild cutting conditions.  Used for turning and milling steel, cast iron and other non-ferrous metals.
C5: For roughing to semi-finishing of Steel.
C2 Coated: Multi Layer CVD (TiC/Al203/TiN) Aluminum Oxide Coated.  Ideal for machining 200 and 300 series stainless steel, cast irons, non-ferrous alloys and most high temperature alloys.  Excellent wear resistance.
C5 Coated: Multi Layer CVD (TiN/TiC/TiCN/TiN) coating.  Best for general purpose milling and turning carbon and alloy steels and tool steels.

Not all carbide grades are available with all inserts.